Mineral Insulated Resistance Thermometer with Basic Seal

This mineral insulated RTD probe is an inexpensive design usually for assembly into your own high volume equipment or to fit your own cold end fitting.

Application Notes:

  • Inexpensive termination
  • Ready for users to fit their own cold end fitting

Delivery time: Product made to order, delivery date to be confirmed.

PQAL black on white ukas 9001 logo

 

 

ISO 9001 Approved: Certificate

SKU: MRB Category
Need some help?
Call us: +44 (0) 1246 261 999 websales@peaksensors.com

"*" indicates required fields

Name*
This field is for validation purposes and should be left unchanged.

Similar Products

0
    0
    Your Basket
    Your basket is emptyReturn to Shop
        Scroll to Top

        Technical Information

        Technical Diagram

        Shipping Information

        Quote Request

        Special Options:

        • Duplex
        • Reduced tips
        • Other diameters available
        • Sensors bent to shape
        • Compression Fitting
        • Cold end seal to 350 ° C
        • Higher accuracy sensors A, 1/3,1/5,1/10 DIN
        • Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
        • 2 or 4 wires
        • Tagging
        • RT can be replaced with a thermistor
        • Material Certificates
        Type Designation:

        MRB

        Temperature Range:

        -100 to 500 ° C

        Common Sensor Types:

        1 Pt 100 B

        Temperature Coefficient:

        0.3850 ohms/° C

        Wiring:

        3 wire, marked red/red/white

        Common Diameters:

        Ø 3.0, 6.0mm

        Common Sheaths:

        316 SS

        Cold End Max Temperature:

        150 ° C

        Tail detail:

        20mm nominal

        Mineral Insulated Resistance Thermometer with Basic Seal

        Delivery time: Product made to order, delivery date to be confirmed.

        Need a Mineral Insulated Resistance Thermometer with Basic Seal?

        Need a quote or have a question about our products? Get in touch!

        "*" indicates required fields

        Name*
        This field is for validation purposes and should be left unchanged.