Cable Resistance Thermometer With Exposed Element
This cable resistance thermometer design very inexpensive. This could be used to go into an existing sheath or have further production. This can be used in some circumstances to replace a broken resistance thermometer.
Application Notes:
- Flat round section supplied
- Inexpensive sensor
- Replacement element
- For assembly into sheath
- Low thermal mass
- Suitable for equipment assemblies
Delivery time: Product made to order, delivery date to be confirmed.
Compliance:
REACH (1907/2006) 2025)
RoHS 3 (2015/863)
Mineral Conflict
ISO 9001 Certified
Technical Information
Technical Diagram
Shipping Information
Quote Request
Special Options:
- A range of standard and special housings are available for element protection
- Stainless steel or tinned copper overbraid
- Round section available
- Duplex
- Higher accuracy sensors A,1/3,1/5,1/10 DIN
- Other stranding options
- Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
- 2 or 4 wires
- Tagging
- RT can be replaced with a thermistor
- Material Certificates
| Type Designation: | CRJ |
| Temperature Range: | -100 to 300°C |
| Common Sensor Types: | 1 Pt 100 B |
| Common Sensor Size | 2 x 2.2mm, thin film |
| Temperature Coefficient: | 0.3850 ohms/° C |
| Wiring: | 3 wire, marked red/red/white |
| Common Insulation: | PVC, Silicon rubber, PFA, Glass fibre |
| Common Stranding: | 7×0.2 |
| Tail detail: | 50mm tails, 10mm tinned |
Delivery time: Product made to order, delivery date to be confirmed.
Bespoke Quote Request
Fill in and submit the form and we will get back to you with a quote within one working day.
Alternatively contact us on +44 (0)1246 261999 or websales@peaksensors.com
"*" indicates required fields
"*" indicates required fields
Similar Products
Related products
-
Cable Resistance Thermometer with Metal Pocket
View Product This product has multiple variants. The options may be chosen on the product page
