Bolt RTD Temperature Sensor
This cable resistance thermometer design can be screwed directly into a heat source. For instance a transformer heat sink. This resistance thermometer is commonly used by original equipment manufacturers.
Application Notes:
- A very common sensor type
- Fast sensor response possible
- The enclosure has many possibilities
- Highly engineered pockets are possible
- Ideal for high volume manufacture and fixing in to original equipment
- Very small sizes available
- A wide variety of encapsulants for pocket filling
Delivery time: Product made to order, delivery date to be confirmed.
Compliance:
REACH (1907/2006) 2025)
RoHS 3 (2015/863)
Mineral Conflict
ISO 9001 Certified
Technical Information
Technical Diagram
Shipping Information
Quote Request
Special Options:
- Duplex
- Small stop flange
- Cable spring relief available
- Partial heat transfer paste filling
- Higher accuracy sensors A, 1/3,1/5,1/10 DIN
- Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
- 2 or 4 wires
- Tagging
- IP68 compatible designs
- RT can be replaced with a thermistor
- Material Certificates
Type Designation: | CRS |
Temperature Range: | -100 to 300°C |
Common Sensor Types: | 1 Pt 100 B |
Temperature Coefficient: | 0.3850 ohms/° C |
Wiring: | 3 wire, marked red/red/white |
Common threads: | M5, M6, M8, M10, BA sizes |
Common Insulation: | PVC, Silicon rubber, PFA, Glass fibre |
Common Stranding: | 1×0.2, 1×0.315, 1×0.5, 7×0.2, 13×0.2 |
Common Sheaths: | 316SS, Brass, Aluminium |
Tail detail: | 50mm tails, 10mm tinned |
Delivery time: Product made to order, delivery date to be confirmed.
Bespoke Quote Request
Fill in and submit the form and we will get back to you with a quote within one working day.
Alternatively contact us on +44 (0)1246 261999 or websales@peaksensors.com
"*" indicates required fields
"*" indicates required fields